Bamboo full-automatic production line toothpick making machineProduct description
3phase
1. The original bamboo - take the material sawing - open bamboo - section of the set wide open film - drawing - bleaching - drying - cut length - polished - finishing - sharpening - packaging.
2. More than 10 for a production line, the production of two pointed toothpicks, 8 hours of production 800,000, about 100 kg. Need to operate 4-6 employees, the use of industrial electricity 380v. An increase of Unit 9, the output doubled, then 1.6 million.
3. If you want to produce a tip of a carved bamboo toothpicks, then replace the 9 machine (a sharpening machine) can, the same 10 machines as a set, 8 hours output of 600,000, an increase of 9 (a sharpening machine One), production doubled, then 1.2 million.
4. Usually every 100 kg of fresh (wet) bamboo, can produce diameter 2.0mm, 65mm long toothpick specifications of 10-13 million, about 13-16 kg dry finished toothpicks.
Technical parameters
No.ItemDescription & parametersMotor 1Bamboo sawing machineModel : UD-111
Weight : 65 kg
Dimension :900*510*930 mm2.2 kw 2Bamboo dissection machineModel : UD-102
Weight :630kg
Dimension :3000*850*1200mm3.0 kw3Bamboo flakerModel : UD-103
Weight :450kg
Dimension :1460*660*1000mm3.7 kw4Bamboo filament shaping machineModel : UD-104
Weight :450kg
Dimension :1050*650*990mm8.1kw5Bamboo filament set-size machineModel : UD-105
Weight :85kg
Dimension :1500*650*990mm0.75kw6bamboo toothpick set-size machine Model : UD-278
Weight :210 KG
Dimension :900*600*800 mm2KW 7Polishing machine Model : UD-80
Weight :120 kg
Dimension :1000*800*1200 mm1.5kw 8toothpick finishing machine Model : UD-113
Weight :65 kg
Dimension :530*1000*800 mm0.55kw 9Tooth pick mincing machineModel :UD-268
Weight :260 kg
Dimension :900*570*1010 mm2.75KW 10Multi-sharpen machineModel : UD-112
Weight :65kg
Dimension :750*500*950mm0.55kw